High Quality Japanese Dragon Sword Samurai Katana Full Tang Blade Can Cut Bamboo

High Quality Japanese Sword Kata. HIGH QUALITY JAPANESE DRAGON SWORD SAMURAI KATANA FULL TANG BLADE CAN CUT BAMBOO.

Overall Length: 40.9 inch /104 cm. Nagasa Length: 27.8 inch / 70.5 cm.

Handle Length: 10.6 inch / 27cm. Blade Material: 1060 High Carbon Steel. Tsuba Material: High quality alloy Tsuba. Blade Width (near Habaki): 1.26 inch / 3.20cm.

Blade Width (near Kissaki): 0.91inch / 2.30cm. Weight (with Saya): 2.31 lbs / 1.05 kg (approximately). Weight (without Saya): 2.17 lbs / 0.98 kg (approximately).

Saya Material: Hard wooden with black&white finish. Handle Material: Genuine Ray skin + Hard wooden.

This KATANA is hand forged and hand sharpened using Japanese methods to create a perfect blade. Fully functional and battle ready. The accessories of the sword are all authentic from the ray skin handle, to silk sage-o and copper oxidized fittings.

This is the best sword you will find in the price range. Materials And Way Of Forge. Blade: The blade of the sword has been hand forged using the ancient method of sword making. Full hand forged, hand polished and hand sharpened.

The blade was made of 1060 high carbon steel, and it has been laminated in a Maru style. The blade has long Hi (blood groove) on each side, This not only allows for a lighter blade and audible feedback when swung. But also can balance the blade to achieve optimal performance. The tip of the blade is a Chu Kissaki (medium length). This blade has been hand polished with multiple grade sharpen stone by Japanese method, which made the surface of the blade like a mirror, the blade is also very sharp.

This blade comes with a full length Tang which greatly enhances the strength of the sword. This sword is strong enough to cut through a thick bamboo tree with a single strike yet sharp enough to slice paper. Tsuba: The Tsuba (guard) of the sword is made of alloy.

The Habaki (blade collar) is a one piece brass construction. Two Seppas (spacer) secure the Tsuba.

Tsuka: The Tsuka (handle) core is wooden and it is tightly wrapped over genuine Ray skin Samegawa with synthetic silk Ito. The Fuchi (sleeve) and Kashira (buttcap) are made of alloy. The Tang of the sword is secured by two Mekugi (peg). Two copper Menuki (ornament) are on each side of the Tsuka. Saya: The saya (sheath) of the sword is hard wooden.

Sage-O has been tied around the bright copper Kurigaga (knob) of the scabbard. The Koiguchi has been hardened. This is a sharpened, super, truly battle ready Samurai sword very suitable for iaido and kendo superior. It is also allows you to make a collection of realistic, yet beautiful samurai sword, or to present one to your friend.

Don't miss such a chance! NOTE: (1) A silk sword bag comes with the sword. But the wooden stand in below item pictures is NOT included. (3) This Katana can be taken apart fully anytime for maintenance purposes, you can disassemble the sword from the handle by taking out two pegs. (4) Due to our swords are full hand made, so Specs will vary slightly from sword to sword.

Do you want an unique sword? Here you can get whatever you want. All our standard blades are available with customizable parts, where you can choose from a large array of fittings, Ito, Sageo and Saya.

It is free to choose following parts instead of original ones! We also can engrave your name, simple symbol or something else you like on the blade, it is also free!!!

(1) HI (blood groove) : NO-HI blade is more stronger for cutting, BO-HI blade is more lighter for prctise. (3) Sword Set: We can make a Wakizashi (medium) and a Tanto (short) to match this katana sword. Our blades are all FULL TANG blades, we have not any shortened Tang blades. Oure blade are all full handmade, if you need to customize the blade, please give us enough time to make it, as we all knownSoft fire makes sweet malt. We have not any FAKE or MACHINE-MADE hamon blades; Our blades with hamon are result of differentiated hardening with clay, they are real hamon, WE DO NOT MAKE ANY FACK OR MACHINE-MADE HAMON ON THE BLADE.

E can engrave Chinese characters, English letters or Japanese kanji on the blade by engraving machine, it is. E also can engrave simple logo or something else you like on the blade by etching.

You need pay an additional. And we need about one week to complete it.

Usually, we would engrave the name or logo on the blade toward the handle. We also can engrave your name on the Full Tang. It is not a problem to engrave in other locations on the blade. Black blades and colored blades are not suit for engraving. The blades with blood groove are not suit for big images' engraving.

:GENUINE RAY SKIN (SAMEGAWA) FOR CHOOSING (Free). The "rayskin" (sometimes called shagreen) is actually fish skin taken from specific species of stingray or shark.

It has been used on Japanese Sword handles for a very long time mostly due to its rough texture which when wrapped with'cord', denies the cord from slipping. We have six colors for choosing, if you do not like the color on the above sword, you. Are free to choose following colors instead of original one! TSUKA-ITO is the cord wrap on the handles of Japanese swords. Its purpose is both aesthetic and functional, Ito comes in a wide array of color to suit every taste, and it helps reinforce the tsuka and prevent failure.

You can choose following Tsuka-Ito instead of original one. NOTE: if you choose the Tsuka-ITO here, In order to match Tsuka-ITO, we will choose same color for sageo. You also can upgrade the sageo by choosing below imported sageo. Have been used on Japanese swords for many centuries. The purpose of the Sageo is to hold the scabbard into the obi belt and keep it from slipping. It is also used at times to secure the katana into its saya by wrapping the sageo around the tsuka and tying it off. It is easy to customize your Japanese sword by swapping out the Sageo. Ed from Japan, they are available to all who choose to upgrade the appearance of their Saya. To choose following imported segeo instead original one.

You are free to choose following imported segeo instead original one. Tsuka-maki - the art of wrapping the tsuka, including the most common hineri-maki and katate-maki (battle wrap); You can choose the warpping between them, Our focus is making the wrap as tight as possible to keep if functional as long as possible. Is a wooden scabbard for the blade; traditionally done in lacquered wood. Saya are manufactured from very dry wood, they are not can keep the shape of the saya, but also can ensure the blade is not easy to rust.

The below pics just show top part of saya, you are free to choose following saya instead of the original saya. Here there are many high quality SAYA for available , Each Saya is fitted with genuine.

You can ungrade the saya for an addtional. S15-S17 are made of hard wood and lacquered with speckle. S18-S19 are natural wood Saya, S18 is Hualee wood, S19 is hard wood with polished lacquer. Features Rattan covering on the Koiguchi area, and lacquered.

S22-S24 are Same' covered Saya, The Same' (ray skin)has been sanded smooth and filled with polished lacquer. Is usually a round or occasionally squarish guard at the end of the grip of bladed Japanese weapons, like the katana. And its various declinations, tachi. They contribute to the balance of the weapon and to the protection of the hand. The tsuba was mostly meant to be used to prevent the hand from sliding onto the blade during thrusts as opposed to protecting from an opponent's blade.

E have about 200 kinds of tsuba, they can be roughly divided into four groups, ALLOY TSUBA, IRON TSUBA, BRASS TSUBA and HIGH QUALITY BRASS TSUBA. You can choose following Tsuba instead of original one. A lloy Tsuba For Choosing (FREE). To see more alloy tsuba...... We'll try to provide you with the great service and the best prices!

We have many sword smiths in our factory, whose techniques are very exquisite. We GUARANTEE that our my swords are full hand forged, hand polished and hand sharpened, the quality is very great. LARGE SELECTION OF JAPANESE SWORDS AND CHINESE SWORDS. For Japanese swords, we have near all kind of Japanese swords, such as KATANA swords, WAKIZASHI swords, TANTO swords, NAGINATA swords, NINJA swords, SAKABATO swords and so on; For the Chinese swords, we have Chinese sword "DAO" and "JIAN". Here you can find what you want!!

EASY CUSTOMIZE YOUR OWN SWORDS. All our standard blades are available with customizable parts, where you can choose from a large array of fittings, Ito, Sageo, Saya and other options. We also can customize the blades for you if you give us detailed specifications, in addition, in order to make your sword more unique, we can engrave your name, simple symbol or something else you like on the blade. One word, we can customize ANY blades you like!! At the same time, we will keep tracking the status of your item until you receive the package. Austria, Belgium, Finland, France, Germany, Ireland, Luxembourg, Malta, Norway, Portugal, Spain, Sweden, Switzerland, UK. United States , Australia and Canada. Special customized sword may need more time. We will do whatever reasonable to resolve your problem as long as we are given the opportunity. The item "HIGH QUALITY JAPANESE DRAGON SWORD SAMURAI KATANA FULL TANG BLADE CAN CUT BAMBOO" is in sale since Tuesday, October 15, 2013. This item is in the category "Collectibles\Knives, Swords & Blades\Swords & Sabers\Asian\Japanese". The seller is "swordsmith668" and is located in Long Quan, China. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Handle Material: Wood + Real Ray Skin
Authenticity: Original
Handedness: Double-Handed
Tang: Full
Dexterity: Ambidextrous
Brand: HanBon Forge
Type: Katana
Edge: Single
Sword Type: Samurai Sword