New Cut Wood

Mafell MT55cc MidiMax 240V Plunge Cut Saw + 2 x Guide Rail + 2 x Clamps + Bag


Mafell MT55cc MidiMax 240V Plunge Cut Saw + 2 x Guide Rail + 2 x Clamps + Bag
Mafell MT55cc MidiMax 240V Plunge Cut Saw + 2 x Guide Rail + 2 x Clamps + Bag
Mafell MT55cc MidiMax 240V Plunge Cut Saw + 2 x Guide Rail + 2 x Clamps + Bag
Mafell MT55cc MidiMax 240V Plunge Cut Saw + 2 x Guide Rail + 2 x Clamps + Bag
Mafell MT55cc MidiMax 240V Plunge Cut Saw + 2 x Guide Rail + 2 x Clamps + Bag

Mafell MT55cc MidiMax 240V Plunge Cut Saw + 2 x Guide Rail + 2 x Clamps + Bag    Mafell MT55cc MidiMax 240V Plunge Cut Saw + 2 x Guide Rail + 2 x Clamps + Bag

Mafell MT55cc MidiMax 240V Plunge Cut Saw + 2 x Guide Rail + Clamps + Bag - Kit. All MT 55 features are geared towards precision e. Tear-free cutting, central locking, fine adjustment of cutting depth, high speed, tracking pointer, adaptable slot, undercutting, position indicator etc. Can be used with the most popular track systems - Festool, Makita (including means of eliminating play), and of course MAFELL. Immediate access to blade: consequently amazingly fast and without teeth being scratched.

System accessories - From a range of tools to extensive special accessories for the MT 55 and guide rail F. Saw blades, splinter guard F-SS, non-slip profile F-HP, angle fence F-WA, connecting piece F-VS, stop F-AS (kickback stop), position indicator MT-PA etc. Suitable for boards and solid wood. Scoring function - Precision, tear-free cuts, even if the rubber lip is worn. Tracking pointer - Maximum precision, even when cutting freehand. Adaptable slot - Can be adapted to other track systems. Any play is eliminated reliably and accurately by index notches on the guide jaws. Central locking - Angle setting fixed in two locations with a single screw. Faster, simpler and more accurate thanks to the U-shaped guide rod. Position indicator - Useful marking of the point where the blade enters the workpiece; an exclusive MAFELL feature. Practical and precise control of the saw blade as it enters and leaves the work surface.

Versatile cutting depth pointer - With or without a rail, no need to work out dimensions. A quick twist of the ingenious pointer no brainwork required.

Cutting depth fine adjustment - for extremely fine adjustment of the cutting depth beyond the standard 1 mm accuracy e. Fermacell taking accuracy and precision to new heights. Tilt settings -1° to 48° - Overrides 0° and + 45° positions with an automatic system reset, undercuts without the risk of subsequent mistakes caused by forgetting to reset. High torque - Comfortable reserves of power, meaning problem-free, convenient cutting, however tough the going. No-load speed 6,300 rpm - Out-and-out high cutting speed, producing exact and clean cuts.

Plexiglas dust protection slide and closed cover - Extremely clean cutting with minimum dust e. Gypsum wallboards, no special accessories needed. Clear view of the pointer through Plexiglas slide facilitates free-hand cuts. Max case with accessory tray - Room for every last small item inside the cleverly designed case, even angle fence F-WA has a proper home.

Motor and gear noise - Extremely quiet when idling and under load, you can say goodbye to vibration and loud noise. Digital electronics - Wear-free: no rotating parts, therefore no unnecessary repair costs. Mechanical motor brake - Ideal, as keeps wear to an absolute minimum, the electronic solution is subject to much greater wear. Hose connector with Velcro tape for mains cable - Hose and cable leave the machine in the same direction and do not obstruct work. Effective cable guide without expensive special accessories.

Indents on hose connector - Eliminates accidental twisting, hose locator remains in the set position. Slot width marker - Clear visibility, Chamfering makes for simple contact. Handle at 62° - Ergonomic handle positioning. Convenient and strain-free grip without placing the wrist at an awkward angle. Plunge-cutting without a riving knife - Saw blade retracts into a guard in next to no time. More flexible saw blade changes without having to pay attention to the riving knife. Cutting depth : 0 - 57 mm. Cutting depth at 45° : 0 - 40.5mm.

Tilt range : -1 bis +48°. Nominal no-load speed : 3600 - 6250 1/min.

Normal load speed : 3400 1/min /. Universal-moto r: 230 V / 50 Hz.

TCT saw blade 162 x 1.2/1.8 x 20mm (6 3/8in), AT, 48 teeth. 2 x 1600mm Guide Rail.

1 x Guide Rail Connector. Carry Bag for Guide Rails.

The item "Mafell MT55cc MidiMax 240V Plunge Cut Saw + 2 x Guide Rail + 2 x Clamps + Bag" is in sale since Friday, February 17, 2017. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Saws\Circular Saws".

The seller is "trade-counter-online" and is located in Dundee. This item can be shipped worldwide.

  1. Model: MT55cc
  2. Colour: Red
  3. Battery Included: No
  4. Custom Bundle: Yes
  5. Blade Location: Right
  6. Type: Plunge Cut Circular Saw
  7. MPN: 917632
  8. Brand: Mafell
  9. Manufacturer Warranty: 3 years
  10. Country/Region of Manufacture: Germany
  11. Unit Quantity: 1
  12. Blade Strength: High
  13. Power Source: Corded Electric
  14. Unit Type: Unit
  15. Motor Type: Brushed
  16. Set Includes: Case
  17. Suitable For: Wood
  18. Blade Diameter: 160 mm
  19. Bundle Description: Mafell T-Max Systainer. TCT saw blade 162 x 1.2/1.8 x 20mm (6 3/8in), AT, 48 teeth. 2 x 1600mm Guide Rail.

    1 x Guide Rail Connector. Carry Bag

  20. Voltage: 230V


Mafell MT55cc MidiMax 240V Plunge Cut Saw + 2 x Guide Rail + 2 x Clamps + Bag    Mafell MT55cc MidiMax 240V Plunge Cut Saw + 2 x Guide Rail + 2 x Clamps + Bag