Ranging from 100W to 150W, these laser machines can engrave deeper and cut through 10 mm to 15 mm (2/5" to 3/5") thick plywood and acrylic. HIGH LASER POWER: This laser engraving and cutting machine comes with a YL 100W CO2 laser tube to cut through thick materials and engrave your designs faster, deeper, and clearer. RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs.
LCD DISPLAY: A secondary display panel monitors the real-time electric current in milliamps and auto-judges fault, easing the troubleshooting process and reducing potential damage to the laser tube and power supply. Plus, its accessibly located on the left side of the machine. LINEAR RAIL GUIDING SYSTEM: Equipped with X, Y, and Z stepper motors for efficient power transmission between the guide rails with high precision and long service life. MOTORIZED AUTOFOCUS WORKBED: The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height.VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, its equipped with a sepia tint to protect your eyes from indirect laser beam exposure. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machines path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75 or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.
TWO-WAY PASS-THROUGH: Theres always extra room! Equipped with 43"W x 2.88"H front and rear pass-through doors to accommodate materials larger than the table size. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup.
Only use with distilled water, ensuring it stays between 6070°F (1621°C). WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube.
AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the Enter button to continue operation. EFFORTLESS CLEANUP: A debris collection system below the workbed funnels engraving debris into a removable collection tray, helping maintain your machines cleanliness and easing the cleanup process. LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber.
Marking/Engraving:Acrylic, Wood , Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered.FDA , CE , ISO9001, EN ISO 11553-1 IEC 60825-1 Certification. If you must modify your. Laser tube and power supply.
Special circumstances will be stated clearly in the listing. If your item has been damaged in transit or.Please check everything carefully after you receive the parcel, as any. Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you.
Please submit all enquires via the Ask a Question tab, located at the bottom of this page. The item "100W 40x24 Bed CO2 Laser Engraver Cutter Cutting Engraving Machine Autofocus" is in sale since Wednesday, September 16, 2020. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving".The seller is "seriouswholesaler" and is located in Ontario, California. This item can be shipped to United States.
Cutting Speed: 15.75 in. (40 cm/s)