14-3/4 Wood Lathe Bowl Chuck + Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New

  
This is a giant 14-3/4" Wood Bowl Lathe Chuck consisting of a PSI Utility-Grip 4-Jaw Self-Centering Wood Turning Chuck with 2 Jaw Sets, a Jumbo Jaw Set, and a Flat Jaw Extension Set, for use on Shopsmith wood lathes with a 5/8" plain spindle and also 1-8 threaded lathe spindles. Giant PSI Wood Lathe Bowl Chuck for finishing bowl bottoms. 14-3/4 Bowl capacity with jaws fully extended. Can be used as shown in the pictures on 14 lathes or larger.

Extension jaws can be band sawed to any diameter to fit smaller lathes. Set includes: 4" Utility-Grip Chuck (w/ extra sets of jaws), 8" Jumbo Jaw Set, & Flat Jaw Extension Set. 4 PSI Utility-Grip Chuck system. 4-Jaw x 4 diameter self-centering chuck threaded 1x8. With Shopsmith spindle adapter for 5/8 plain spindles.

#1 Step jaws grip OD's from 0" to 1-7/8" and ID's from 7/16" to 2-3/8". #2 Step jaws grip OD's from 0" to 1-7/8" and ID's from 1-1/2" to 3-1/4". Round jaws grip OD's from 1-7/16" to 3" and ID's from 1-15/16" to 3-5/8".

With set of 2 chuck tightening rods. With 8 extra jaw mounting screws. With 8 pc 1/2 long rubber coated pin set.

With 8 pc 3/4 long rubber coated pin set. With set-up and operating instructions & all hardware to mount the 2 jaw sets.

Chuck body is chrome plated... Jaws are black oxide finished. Jumbo Jaws are chrome plated steel. Flat Jaw Extension Set is HD fiberglass with brass threaded inserts. This is a super versatile 4" wood lathe chuck system for finishing the bottom of bowls & banjo bodies up to 14-3/4" in diameter.

Please note that we sell the Utility Grip Chuck, Jumbo Jaw Set, & Flat Jaw Extension Set on separate listings in our store. Safety Note: It is very important that you securely fasten the spindle adapter to your lathe spindle, and the chuck to the spindle adapter. Failure to properly secure these components can result in injury. The item "14-3/4 Wood Lathe Bowl Chuck + Jumbo Jaws + 2 Jaw Sets Fits Shopsmith 5/8 New" is in sale since Tuesday, January 24, 2017. This item is in the category "Home & Garden\Tools & Workshop Equipment\Power Tool & Air Tool Accessories\Lathe Accessories". The seller is "thirddevil" and is located in Jacksonville, Florida. This item can be shipped to United States.

1. Model: 14-3/4" Wood lathe Bowl Chuck
2. Type: Large diameter lathe chuck
3. MPN: Does not apply
4. Brand: Unbranded
5. Application: Cutting