1420 10W CNC Laser Engraver USB Desktop DIY Metal Marking Wood Cutting Machine

  
1420 10W CNC Laser Engraver USB Desktop DIY Marking Machine for Metal Stone Wood. Support operating system: Windows 7/8/10.

This is the most powerful DIY Laser engraver available. It comes with 10W Laser. It can engrave metal and stone, cut wood, foam and other materials easily. Plug and play, Easy to use.

Connect the USB cable to the board, install the software and start engraving. Just a few screws away from connecting to your laptop! 1 What kind of metals can this machine mark? This machine can mark on stainless steel, iron and colorized anodized aluminum, can not engrave/mark on gold or silver, brass, etc. 2 Can it engrave a depth on metal?

There is no visible depth for the mark, can only leave a permanent marking. 3 Can it cut wood?

Can easily cut about 3-4mm normal hardness to soft wood. Hard types of woods should be tested by yourself. 4 Can it mark on glass? Can not mark on glass or similar surface. 5 Can it mark on slightly curved objects?

This machine can mark only on the completely flat surface since the focal length is fixed. Body material: Aluminum + Acrylic. Engraving area: 14 x 20cm / 5.51" x 7.87".

Engraving speed: 0.02 to 0.2 sec / pixel. Laser power: pulse 10w (100ns Duty 50%) Average 6-6.5W. Marking materials: Stainless steel, iron, anodized aluminum, ceramics, stone. Engraving materials: Wood, bamboo, leather, plastics, etc. Software 255 adjustable laser power, low-light positioning, positioning freedom, gray, shortest path algorithm, nanosecond timing of serial data transmission substantially without delay, power adjustable, high power pulsed laser, lifts fast focusing, targeting low light gray print.

Power supply Input: AC 100V-240V, 50/60Hz. Power supply Output: DC 12V 4A. Software: Machine developed for use with AC master software, support Chinese, English, Russian, 4 languages. Package size: 65 35 25cm. Super-reduced instruction, 1 byte of instruction accounted for more than 40%.

Faster than Arduino + grbl, and instantly able to complete the task of interpretation of active instruction; shortest path algorithm can shorten the time. 1pc Manual Lifting Platform 10x10cm \ 4"x4" (Lab Jack). Feedback is very important to us. It is impossible to address issues if we do not know about them!

Faction is our ultimate goal. We work hard to earn your trust and future business.

A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. The item "1420 10W CNC Laser Engraver USB Desktop DIY Metal Marking Wood Cutting Machine" is in sale since Sunday, February 10, 2019.

This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "call_it_a_deal" and is located in Rowland Heights, California. This item can be shipped to United States.

1. Brand: Unbranded
2. MPN: Does Not Apply
3. Bundle Listing: Yes
4. Plug: US PLUG
5. Support operating system: Windows 7/8/10
6. Body material: Aluminum + Acrylic
7. Drive system: Stepper motor
8. Stepper precision: 0.00625mm
9. Engraving area: 14 x 20cm / 5.51" x 7.87
10. Engraving speed: 0.02 to 0.2 sec / pixel
11. Laser power: pulse 10w (100ns Duty 50%)
12. Marking materials: Stainless steel, iron, anodized aluminum, ceramics
13. Engraving materials: Wood, bamboo, leather, plastics, etc.
14. Height restrictions: no
15. Interface: USB
16. Power supply Input: AC 100V-240V, 50/60Hz
17. Power supply Output: DC 12V 4A
18. Software: Benbox
19. Weight: 4KG