1500W 3 Axis CNC Router Engraver Engraving Machine Metal Wood Cutting 6040 DHL

  

1500W 3 Axis CNC Router Engraver Engraving Machine Metal Wood Cutting 6040 DHL. Suitable for PCB, wood, Plexiglass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper. This CNC 6040T machine is suitable for industry, Technology Research, Advertising Design. Arts Creation, Teaching, Student Project and Hobby Purposes. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic.

MDF board, native wood, PVC, Acrylic, wood, composite board plywood. Copper and silver to engrave them into 3D/2D works etc. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. The mini CNC router Frame is movable.

The machine can connect with computer as other external device such as printer, scanner.. With the assist of the CNC ROUTER 6040T, your design idea will be real-time display. X, Y, Z Working Area: 600(Y)390X120(Z)mm.

Lathe structure: 6061/6063 Aluminium alloy. X axis---High intensity Chromeplate shaft. Y axis---High intensity Chromeplate shaft. Z axis---High intensity Chromeplate shaft.

1Water cooled spindle motor can work longer time than air cooled motor. 2Water cooled spindle motor has higher stability and better concentricity than air cooled motor. The spindle motor must connect with the VFD.

It cannot directly connect with the supply voltage (AC220V). Please don't change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket.

VOLTS, current, power: AC220v 50hz, 5A. Spindle motor: 1.5 KW water cooled. Principal axis collet:ER11colletStandard configuration :6mm. Mode: By adjusting the VFD output voltage and operating frequency. Lubrication way: Lubricated by high grease.

Spindle precision: radial beat acuities 0.03mm. Carving Instructions: G code / TAB files / nc file / NCC files. Communication interface: through parallel connection with computer. Software environment: Windows XP/win7, 32bits system.

Working Speed: 50-1500mm / min (different material with different speed settings). The engraver will come with MACH3 softwareFree Version. If you followed the installation tips offered by us, it works like full version. The software perform better on the 32bites system computer.

Please close the firewall and antivirus software on the computer before DOWNLOADING AND installing the software. Otherwise, the antivirus will regard the cnc software as virus and stop the installation.

Please don't update the software when installed, then it will not need the license Numbers. Control unit: Toroidal transformer + PWM power supply module + TB6560stepping motor drive. The NEW 1.5KW water-cooled VFD is available operating for long time, which can reinforced the processing abilty of the machine and can be used toprocess aluminum alloy and hard wood.

Water cooling spindle works more stable and durable. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a 25pin parallel port output.

Place the contral box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off.

Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Otherwise, it will damage the driver of the controller. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.

Installing a CNC control software and Drive such as the MACH 3 or EMC2on your computer. Fllowing our manual or guideline to set uo the software. Before turn on the machine, please check all the cable and water-cooling system to make sure they are working fine.

You can enjoy making you dream with using our CNC machine now. 32-bit version of Windows 2000, Windows XP, Windows Vista, or Windows 7 (64-bit versions will not work) 1Ghz CPU 512MB RAM Non-integrated Video Card with 32MB RAM(Large G-code files, especially 3D files will require a video card with 512MB RAM or higher). We promise that every item has been sent. But sometimes there is also 0.3% package lost during transport.

Faction is our ultimate goal. We work hard to earn your trust and future business.

A If you receive a defective item, Please tell us the problem in details and Please con-tact us within 14 days after you receive the package. We will provide you the best solution for any problem with the item. Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply you-= within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.

Please feel free to con-tact us if you have any questions. The item "1500W 3 Axis CNC Router Engraver Engraving Machine Metal Wood Cutting 6040 DHL" is in sale since Sunday, October 27, 2019. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers".

The seller is "autowelcomehere" and is located in Basel. This item can be shipped to United States, all countries in Europe.

1. Note: not ship to Canarias
2. Model: 6040
3. Country/Region of Manufacture: China
4. X,Y,Z Working Area: 600(Y)*390X*120(Z)mm
5. Outside dimension: 865*680*570mmL*W*H
6. Table size: 770Y*490Xmm
7. Lathe structure: 6061/6063 Aluminium alloy
8. Max. Feeding height: 100mm
9. Stepping motor: 57 two-phase 3A 150N.cm
10. VOLTScurrentpower: AC220 /50Hz5A,1.5KW VFD
11. Spindle speed: 24000 rpm
12. Max working frequency: 60Hz
13. Principal axis collet: ER11colletStandard configuration :6mm
14. Nut Model: ER11-A
15. Cooling: Water-cooling
16. Lubrication way: lubricated by high grease
17. Repeat accuracy: 0.05mm
18. Spindle precision: radial beat acuities 0.03mm
19. Carving Instructions: G code / TAB files / nc file / NCC files
20. Herstellernummer: Nicht zutreffend
21. Marke: Markenlos
22. EAN: Nicht zutreffend
23. UPC: Nicht zutreffend
24. Brand: Markenlos
25. MPN: Nicht zutreffend
26. Software environment: 32bits windows XP / win7