40W Laser Engraving Machine Laser Cutting Machine Laser Tube Wood Fabrics Cutter

  

40W CO2 Laser Engraving Machine. This CO2 engraving machine, with an engraving area of 12"x8" (30x20cm), integrates the newest light, machine and electricity mechanical movement to design this high precise and high speed three generation modal CO2 LASER Engraver. Equipped with one 40W water cooling laser tube, high precise stepping motors, and high quality LCD control board.

It employs a USB port and thus can be connected to your laptop or desktop. By the support of included software, CorelDraw, this machine can work well with multiple graphic formats including EMF/JPG/PLT/WMF. CorelDraw has the ability of both NewlySeal and NewlyDraw and so it can be employed in both carving and cutting works. All laser engraving machines can not carve / cut metal or ceramics. Durable Quality High Precision Powerful Performance High Compatibility. This engraving machine can't carve metals without alumina coatings. It can only cut non-metallic materials with a thickness of 3 mm and below. - The CO2 engraving machine adopts a premium 40W CO2 laser tube with a wavelength of 10.6um and high precision stepping motor.

It is equipped with a stable clamp to handle irregular-shaped objects and a level board for flat surfaces with a large engraving area of 12"x8" (30x20cm) to carve most small to medium-sized products. - Engraving cutting precision: 2500dpi. Positioning accuracy: 0.01 mm (0.0004 inch).

The integrated power supply increases the response speed, performance, and cutting power of your machine while also extending your laser tube's life. It is easy to start and stop with TTL level controls. - USB port is available, conveniently connected to desktop or laptop, for more precise control of engraving; The upgraded control panel comes with an LCD for easy & clear observation of machine condition. Engraving speed: 1-300 mm/s (0.04-11.81 inch/s). Cutting speed: 1-10 mm/s (0.04-0.39 inch/s).

- The engraver supports systems of Windows XP, 7, 8, 10. Graphic formats supported: All formats recognized by CorelDraw such as JPG, BMP, AI, PLT, etc. CorelDraw Software included, with the ability of both NewlySeal & NewlyDraw. - This engraving machine is widely used for engraving on the bamboo piece, planks, boulder, horns, leather, crystal, wood, organic plastic, fabrics, ceramic, etc. Suitable for seal engraving, advertisement, art gift, garment, leather, toy, and other industries.

The sealed-off 40W laser tube adopts advanced CO2 technology with increased power and fast operating speeds. And the high-pressure discharge excites a high-concentration CO2 gas to produce a laser with a 10.6um wavelength for effectively engraving and cutting. The high-precision laser head, with high quality, reliable performance, and durability, improves the engraving precision and performance. Its stable laser beams significantly improve your engraving efficiency for various materials.

Temperature display and laser power display make it easier to observe the running condition to correct any engraving or cutting problems. The engraving machine comes with a laser switch, emergency stop switch, power switch, lighting switch for hassle-free operation. The laser engraving machine employs a USB port for convenient connection to desktop or laptop, which obtains a more precise and better control of engraving. The integrated fan improves ventilation performance, lowers noise levels, and increases portability.

A pipeline exhaust fan and air vents are included, which reduce all electronic components' temperature, thus extending its service life. With four locking wheels, this portable laser engraver flexibly moves around your workstation at your convenience and locks firmly in place once you're ready to get started. Also, the cover comes with a handle for convenient opening and closing. 1 x CO2 Laser Engraver 1 x Water Pump 1 x Smoke Pipe 1 x Smoke Fan 1 x Power Wire 1 x USB Cable 1 x USB Key 1 x Accessory Bag 1 x Instruction Video 1 x English User Manual.