Indian Teak composite wood veneer 48 x 120 on paper backer 1/40 thickness

  

Indian Teak composite wood veneer sheet 48" x 120" with paper backer 4' x 10' x 1/40 thickness. Composite is real wood has been dyed and gone through a cutting process to make each sheet consistent, clean and defect free. It is basically otherwise like any other wood veneer as far as laminating and finishing. Some photos may show other sizes, customer projects and wet or finished veneer. Ships rolled in long narrow box.

Trust our experience, knowledge, and reputation. Serving the wood industry since 1995. Other backers and unbacked veneer may be available.

Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible.

It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.

(will not always be exactly correct, but relatively close). Raw plain veneer with no backing = 1/32-1/42. Generally cut with a razor/box knife or similar tools and some type of straight edge. Paper-backed and wood-backed veneers are generally applied with contact cement.

Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. Most any conventional finishing products can be used with veneer that is applied correctly. Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldnt impact overall quality or satisfaction.

There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product. Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection. The item "Indian Teak composite wood veneer 48 x 120 on paper backer 1/40 thickness" is in sale since Friday, July 22, 2011.

This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Raw Materials\Lumber & Veneer\Veneer Sheets & Rolls". The seller is "jsowoodproducts" and is located in Louisville, Kentucky. This item can be shipped worldwide.

1. Veneer Cut: Quarter Cut
2. Veneer Type: Paper Backed
3. Item Type: Veneer Sheet
4. MPN: Quarter Cut Teak veneer wood 1/40th" thickness Q./
5. Wood Type: Teak
6. Brand: Indian Teak composite wood veneer sheet paper back
7. Model: Wood veneer recon engineered reconstituted roll QC
8. Indian Teak composite wood veneer sheet: Quarter Cut 750 Q/C recon reconstituted engineered
9. UPC: Does not apply