Milwaukee 6370-21 8 in. Metal Cutting Saw Kit IN STOCK

  

Metal Cutting Circular Saw delivers faster, cooler, cleaner, more affordable metal cutting. Forget the showers of hot metal chips and sparks that were once an aerial threat on metal construction job sites. The 6370 shears the metal, producing a virtually spark-free wake and cool, burr and scorch-free edges that don not require post-cut finishing. Cool cut waste, in the form of metal shavings, is effectively contained with a durable magnesium blade shield and channeled into the saws integral ChipTank. Cool cutting also means that materials can be handled almost immediately following a cut, reducing downtime.

Driven by a powerful, 13 amp (1-3/4 max HP), 3,700 RPM motor and equipped with a full grill of razor-sharp, cermet-tip teeth, the 6370 tears through tough cuts without hesitation. Count on up to 10 gauge sheets and 1/4 in. Steel plate cuts, all day, every day. More extreme cuts, even up to 3/4 in. Steel plate, are possible when proper operating techniques are used. Any way you slice it, cold cutting metal means value. Internal test results indicate that our new metal cutting blades last a minimum of 25 times a standard abrasive wheel. Specially-formulated cermet tip metallurgy and tooth geometry ensure these incredible blades cut faster, stay sharp longer, and resist more impacts. To keep on target, the new 6370 features a set of on-board sight-line and blade point-of-entry indicators along with a slot in the saws shoe for a rip fence. It is also the first and only corded metal cutting saw to feature a lower guard retraction lever.

Plunge cuts, a frequent challenge for metal roofing contractors, are fast and furious with this exciting new tool. The levers location, adjacent to the side handle, ensures that the user has both hands firmly on the saw throughout the cut. Beyond its capacity to cut solid, thicker gauge materials, the 6370, with a 2-9/16 in. Cut-depth, screams through most corrugated metal roofing and decking sheets, structural, shape, grating and framing materials in one-pass. Insufficient cut depth means material must be flipped over and re-cut, usually a two-man operation.

To ensure a smooth ride, the new 6370 is equipped with a set of serious comfort features. The tools rear and side handles feature soft, tactile gripping surfaces and are designed to comfortably fit any users hands. The side handle is canted forward to reduce wrist strain as well as wrapped completely to the motor housing, offering maximum comfort and control in any cutting orientation. Down-time is lost time so we have added valuable, time-saving features to the 6370. Removing the blade shield to discard cut waste or change blades is effortless with our exclusive, quick-release shield buckle.

The remaining saw controls are conveniently located to ensure fast, effortless operation before, during and after the cut. Dry-cut technology provides faster, cleaner, more affordable metal cutting. Durable blade shield with integral chip tank deflects/collects hot chips and sparks.

Plunge lever for fast, effective plunge cuts. Exclusive quick-release shield latch for fast waste disposal and blade changes. Cut depth for one-pass cuts through most common materials. Powerful 13.0 amp, 3,700 rpm motor. Premium cermet-tipped blades cut faster, cleaner, and longer than other carbide-tipped or friction blades. No Load RPM 3,700. Depth of Cut at 90 Degrees 2-9/16 in.

Metal Cutting Saw Kit (6370-21). You must return an item in the same condition as it was received, not used or altered in any way. We are not open on the weekends. The item "Milwaukee 6370-21 8 in. Metal Cutting Saw Kit IN STOCK" is in sale since Tuesday, October 2, 2012.

This item is in the category "Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Circular Saws". The seller is "greatlakespowertools" and is located in Muskegon, Michigan. This item can be shipped to United States.

1. Model: 6370-21
2. Power Source: Corded Electric
3. Color: Red
4. Blade Location: Right
5. Brand: Milwaukee
6. Custom Bundle: No
7. Motor Type: Brushed
8. Type: Circular Saw
9. Suitable For: Wood
10. MPN: 637021