OMTech 30x16 70W CO2 laser Engraving Cutting Engraver Cutter Ruida Autofocus

  

OMTech 30"x16" 70W CO2 laser Engraving Cutting Engraver Cutter Ruida Autofocus. OMTech 70W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 16"x30" Workbed (AF1630-70E). Our Mid-Range CO2 Laser Engravers known for efficient engraving speeds and considerable cutting capabilities. Ranging from 50W to 80W, these laser engraving machines engrave effectively and cut through 6 mm to 9 mm. 35 thick plywood and acrylic.

Start your laser engraving journey with a Mid-Range laser engraver by OMTech! Four-way pass-through doors allow the workbed to handle materials larger than the bed itself from any direction. This engraver includes 2 workbeds.

One honeycomb and one aluminum blade. Use the control panel to correct the focus automatically at the touch of a button. No more manual testing and adjustment! One USB port reads flash drives while the other connects directly to your PC via dedicated cable. The Ethernet port allows you to work remotely online.

An air compressor mounted on the laser head blows away all smoke, dust, and sparks to protect your laser lens and extend its service life. It comes pre-installed, so it's ready to go as soon as you open the box. 75 cm workbed gives you plenty of space even before you open the integrated pass-through doors that permit you to work on even larger materials including wood, rubber, plastic, paper, fabric, leather, ceramics, tile, fiberglass, marble, stone, and more!

The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes. The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety. Close the cover and press Start to resume your work. Indicator Lights & Emergency Stop. Three indicator lights keep you easily aware of your machine's operation while the emergency stop immediately cuts the laser and stops all moving parts to minimize accidents.

The industrial-grade laser head delivers a stable laser beam over the long service life of the machine, while the red-dot locator helps to quickly indicate engraving points and marks the engraving path, allowing effortless setup and operation. The integrated exhaust system cools and ventilates the unit, removing potentially hazardous smoke and gases. LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber.

Marking/Engraving:Acrylic, Wood , Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered.

FDA , CE , ISO9001, EN ISO 11553-1 IEC 60825-1 Certification. If you must modify your. Laser tube and power supply. Special circumstances will be stated clearly in the listing.

If your item has been damaged in transit or. Please check everything carefully after you receive the parcel, as any. Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years.

It is our mission to provide innovative products and competitive prices to satisfy you. The item "OMTech 30x16 70W CO2 laser Engraving Cutting Engraver Cutter Ruida Autofocus" is in sale since Wednesday, January 6, 2021. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "orionmotortech" and is located in Dayton, New Jersey.

This item can be shipped to United States.

1. Brand: OMTech
2. Material: Acrylic, Felt, Foam, Glass,Neoprene, Paper, Plastic, Rubber,Wood
3. Name Tag Style: Badge
4. Power: 70 W
5. Machine Operation: Computerized
6. Laser Power Supply: 110V/60Hz AC
7. Engraving/Cutting Area: 16 × 30 (40×75 cm)
8. Engraving/Cutting Thickness: 0 (015 mm)depends on materials
9. Workbench Adjustment: Electric
10. Workbed Adjustable Height: 9.1 in.

    Engraving Speed: 23.6 in. Cutting Speed: 15.75 in. (40 cm/s)

11. Graphic Operating Modes: Optimized Raster, Vector, and Combined
12. Transfer Interface: Flash Drive, USB Cord, Ethernet Cord
13. Net Weight: 251.3 lb.

    (114 kg)

14. Machine Size: 49.2×30.3×26.4 in. (125×77×67 cm)
15. Rated Power: 70W
16. Laser Tube Model: OMTech 70W
17. Laser Wavelength: 10.60 m
18. Laser Type: Class 1
19. Laser Tube Diameter: 2.16 in.
    (55 mm)
20. Laser Tube Length: 43.3 in. (1100 mm)
21. Laser Tube Warranty Time: 6 Month
22. Exp. Service Life at <40% / 4070% / >70% Power: 17002000/13001500/8001000 hr.

23. Focal lens Dia: 18 mm
24. Focal lens FL: 2.5 in.
25. Mo mirror Dia: 25mm
26. MPN: USB-70W
27. Engraving Application: Office Signage
28. Engraving Method: Flat Engraver
29. Type: Engraving Machine
30. Model: OMT-EL3016-70