OMTech CO2 Laser Cutting Machine 80W with 28x20 Bed USB Port and Ruida Controls

  

OMTech CO2 Laser Cutting Machine 80W with 28x20 Bed USB Port and Ruida Controls. OMTech 80W CO2 Laser Engraver Cutter Marker Etcher Engraving Cutting Machine with 20"x28" Workbed (MF-2028-80E). Our Mid-Range CO2 Laser Engravers known for efficient engraving speeds and considerable cutting capabilities. Ranging from 50W to 80W, these laser engraving machines engrave effectively and cut through 6 mm to 9 mm. 35 thick plywood and acrylic.

Start your laser engraving journey with a Mid-Range laser engraver by OMTech! COMPACT EFFICIENCY: We replaced this 80W cabinet engraver's traditional base with space-saving caster wheels so you can easily move and secure the machine wherever needed for work, storage, or transport. KT332N RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs.

LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, its equipped with a sepia tint to protect your eyes from indirect laser beam exposure.

RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machines path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75 or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.

FOUR-WAY PASS-THROUGH: Theres always extra room! Equipped with front, rear, and side-to-side pass-through doors to accommodate materials larger than the table size. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 6070°F (1621°C). WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the Enter button to continue operation. EFFORTLESS CLEANUP: A debris collection system below the workbed funnels engraving debris into a removable collection tray, helping maintain your machines cleanliness and easing the cleanup process. LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber. Marking/Engraving:Acrylic, Wood , Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium. Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. FDA , CE , ISO9001, EN ISO 11553-1 IEC 60825-1 Certification. If you must modify your. Laser tube and power supply. Special circumstances will be stated clearly in the listing. If your item has been damaged in transit or.

Please check everything carefully after you receive the parcel, as any. Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer.

As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you.

Please submit all enquires via the Ask a Question tab, located at the bottom of this page. The item "OMTech CO2 Laser Cutting Machine 80W with 28x20 Bed USB Port and Ruida Controls" is in sale since Tuesday, August 3, 2021.

This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "orionmotortech" and is located in Ontario, California.

This item can be shipped to United States.

1. Brand: OMTech
2. MPN: MF-2028-80E
3. Engraving Method: Laser
4. Type: Engraving Machine
5. Material: Acrylic, Felt, Foam, Glass,Neoprene, Paper, Plastic, Rubber,Wood
6. Engraving Application: Gift Personalization, Housegoods, Office Signage, Plaque, Sign
7. Name Tag Style: Badge
8. Power: 80 W
9. Machine Operation: Computerized
10. Model: SH-G570
11. Engraving/Cutting Area: 28" x 20" (70x50 cm)
12. Engraving/Cutting Thickness: 03/5(015mm) depends on materials
13. Workbench Adjustment: Manual
14. Workbed Adjustable Height: 9.1 in. (023 cm)
15. Laser Power Supply: 110V/60Hz AC
16. Max.

    Engraving Speed: 19.6 ips (500 mm/s)

17. Max. Cutting Speed: 15.7 ips (400 mm/s)
18. Graphic Operating Modes: Optimized Raster, Vector, and Combined
19. Transfer Interface: Flash Drive, USB Cord, Ethernet Cord
20. Min. Character/ Letter Size: 0.08" × 0.08" / 0.04" × 0.04"
21. Cooling System: Water, Air Assist
22. Certifications: CE, FDA, CDRH, ISO9001
23. Net Weight: 297 lb.
    (135 kg)
24. Machine Size: 150×86×70cm
25. Rated Power: 80W
26. Laser Tube Model: EFR F2
27. Laser Wavelength: 10.60 m
28. Laser Type: Class 1
29. Laser Tube Diameter: 3.15 in. (80 mm)
30. Laser Tube Length: 49.2 in.

    (1250 mm)

31. Laser Frequency: 28.3 kHz
32. Laser Tube Warranty Time: 12 Month
33. Exp. Service Life at <40% / 4070% / >70% Power: 8000/6500/4000 hr.