OMTech Upgraded 55W 24x16 CO2 Laser Engraver Cutting with Lightburn Ruida

OMTech Upgraded 55W 24"x16" CO2 Laser Engraver Cutting with Lightburn Ruida. OMTech Upgraded 55W CO2 Laser Engraver Cutter with 16 x 24 Inch Work Table, Laser Engraving CNC Machine with Ruida Digital LCD Real-Time Data, LightBurn Software for Windows, Mac OS, Linux (MF1624-55). Our Mid-Range CO2 Laser Engravers known for efficient engraving speeds and considerable cutting capabilities. Ranging from 50W to 80W, these laser engraving machines engrave effectively and cut through 6 mm to 9 mm. 35 thick plywood and acrylic.

Start your laser engraving journey with a Mid-Range laser engraver by OMTech! RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs. LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life. VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. S equipped with a sepia tint to protect your eyes from indirect laser beam exposure. RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine. S path, and identifies positioning sizes, allowing an effortless project setup process. ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 1.75. Or be fully retracted, allowing more control over different focal distance setups. AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise. Equipped with 25"W x 1.88"H front and rear pass-through doors to accommodate materials larger than the workbed size. BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine. WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 60. WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. LaserCutting:Acrylic, Wood, Leather, Plastics, Fabrics, MDF, Cardboard, Paper, Corian, Foam, Fiberglass, Rubber. Marking/Engraving:Acrylic, Wood , Leather, Plastics, Fabrics, Glass, Rubber, Cork, Brick, Granite, Marble, Tile, River Rock, Bone, Melamine, Phenolic, Aluminum, Stainless Steel, Titanium.

Cannot cut hardwoods like mahogany. CO2 laser machines only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered.

FDA , CE , ISO9001, EN ISO 11553-1 IEC 60825-1 Certification. If you must modify your. Laser tube and power supply. Special circumstances will be stated clearly in the listing. If your item has been damaged in transit or.

Please check everything carefully after you receive the parcel, as any. Damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years. It is our mission to provide innovative products and competitive prices to satisfy you.

The item "OMTech Upgraded 55W 24x16 CO2 Laser Engraver Cutting with Lightburn Ruida" is in sale since Wednesday, April 29, 2020. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "premiumautopart" and is located in Memphis, Tennessee.

This item can be shipped to United States.

Brand: OMTech
MPN: MF1624-55
Engraving Method: Laser
Type: Engraving Machine
Material: Acrylic, Felt, Foam, Glass,Neoprene, Paper, Plastic, Rubber,Wood
Engraving Application: Gift Personalization, Housegoods, Office Signage, Plaque, Signs
Name Tag Style: Badge
Power: 55 W
Machine Operation: Computerized
Model: SH-G460
Input Power: 110V/60Hz AC
Processing Area: 16×24 in.
Engraving Depth: 0.25 in. (6 mm)
Workbed Adjustment: Manual
Workbed Height Range: 9 in. Engraving Speed: 23.6 ips (600 mm/s)
Max. Cutting Speed: 15.7 ips (400 mm/s)
Graphic Operating Modes: Optimized Raster, Vector, and Combined
Transfer Interface: Flash Drive, USB Cord, Ethernet Cord
Net Weight: 209.4 lb. (95 kg)
Front-to-Back Pass-Through Size: 25×1
Machine Dimensions: 44.5×29.5×27.2 in. (113×75×69 cm)
Rated Power: 55W
Laser Tube Model: OMTech 60W
Laser Wavelength: 10.6 m
Laser Type: Class 1
Laser Tube Diameter: 2 in. (50 mm)
Laser Tube Length: 39.4 in. (1000 mm)
Laser Tube Warranty: 6 Months
Focal Lens Diameter: 18 mm
Focal Length: 2 in. (50.8 mm)
Mirror Diameters: 25 mm
Exp. Service Life at <40% / 4070% / >70% Power: 17002000/13001500/8001000 hr.