Straight Flush Saw Cuz-D SFS-85 Jamb Saw Free Blade and Shipping

  

This Straight Flush Saw was designed for the people that earn a living with their tools. Built to compete, out-perform and out-last. This revolutionary design allows flush cutting, under cutting, cutting into 90-degree corners, and a max cut depth of 3-1/8. All these features and much more with the familiar feel of a standard circular saw.

The Straight Flush Saw was designed for the people that earn a living with their tools. Cleanly extract sub-floors without damaging sheet-rock, wires, and plumbing. With the ability to set a negative 5-degree bevel, the blade is lifted away from the wall, so finished walls are not damaged. The adjustable cutting depth, in combination with zero clearance cutting, helps prevent necessary damage to material beneath the sub-floor.

And it is possible to cut into and out of corners. Easily perform undercuts for new floor installations. Simple rotate the adjustable handle to 90 degree setting and the saw is ready to undercut. As an added feature, leave the dust extractor on to make a 3/8 offset perfect for tile and laminate wood flooring installs. Gang cut two 2x4 boards in just one pass.

The unique cutting depth also allows cutting a 6x6 beam with just two passes. There is no need to make four cuts with a standard circular saw and finish with a reciprocating saw.

With the ability to retract the blade guard, there is no need to dangerously pin the guard back. An operator can use the thumb actuator without putting their fingers near the blade while keeping both hands on the handles. Bevel cuts can be made up to 65 degrees. How to cut your work in half.

Remove subfloors in minutes instead of hours. Tackle a stack of 2×4's in half the time.

Convert to an undercut saw in just seconds. If you haven't already done the math, we'll do it for you. But do you know average cost of all the saws it takes to do the work of just one Straight Flush saw?

But that's only half of the value story. And this SFS will save you a ton of it. In fact, this SFS can complete jobs like subfloor removal in less than half the time.

Overall, it's been estimated that. SFS can save you as much as 30% on construction costs. So, if you're thinking you can't afford one, maybe you should be asking yourself, How can I afford not to?

4 cuts with a circular saw, finish with a reciprocating saw. Removing a 10' x 10' subfloor. Angle cut with a reciprocating saw. Hand cut with an undercut door jams saw. Item Weight: 14.3 pounds.

Product Dimensions: 20.5 x 5 x 13 inches. Cord Length: 8.5 feet. Included Components: Straight Flush Saw, Rip Guide, Instruction Manual, Vacuum Port, 28-Tooth Blade. Straight Flush Saw vs Circular Saw. Video will open in a new window.